Home › ENGINE ยท 2UZ-FE › ENGINE MECHANICAL › ENGINE FRONT OIL SEAL

ENGINE FRONT OIL SEAL > INSTALLATION

for Preparation Click here



1. INSTALL OIL PUMP SEAL


    A004864E02
  1. Apply MP grease to a new oil seal lip.

  1. Using SST and a hammer, tap in the oil seal until its surface is flush with the oil pump body edge.

    SST
    09316-60011   (09316-00011)



2. INSTALL CRANKSHAFT TIMING PULLEY


    A004446E01
  1. Align the timing pulley set key with the key groove of the pulley.

  1. Using SST and a hammer, tap in the timing pulley with the flange side facing inward.

    SST
    09223-46011  



3. INSTALL TIMING BELT

HINT: