Home › ENGINE ยท 2UZ-FE › ENGINE MECHANICAL › ENGINE FRONT OIL SEAL

ENGINE FRONT OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE TIMING BELT

HINT:



2. REMOVE CRANKSHAFT TIMING PULLEY


    A004445E01
  1. Using SST, remove the timing pulley.

    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05010, 09953-05020, 09954-05010)

    NOTICE:
    Do not turn the timing pulley.



3. REMOVE OIL PUMP SEAL


    A004863E01
  1. Using a knife, cut off the oil seal lip.

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Be careful not to damage the crankshaft.

    HINT:
    Tape the screwdriver tip before use.