Home › ENGINE ยท 2UZ-FE › ENGINE MECHANICAL › ENGINE REAR OIL SEAL

ENGINE REAR OIL SEAL > REMOVAL

for Preparation Click here



1. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for 2WD)

HINT:



2. REMOVE AUTOMATIC TRANSMISSION ASSEMBLY (for 4WD)

HINT:



3. REMOVE DRIVE PLATE & RING GEAR SUB-ASSEMBLY


    A134399E01
  1. Using SST, hold the crankshaft.

    SST
    09213-70011  
    09330-00021  



    A004857
  1. Remove the 8 bolts, front spacer, drive plate and rear spacer.



4. REMOVE ENGINE REAR OIL SEAL


    A004858E01
  1. Using a knife, cut off the oil seal lip.

  1. Using a screwdriver, pry out the oil seal.

    NOTICE:
    Be careful not to damage the crankshaft.

    HINT:
    Tape the screwdriver tip before use.