Home › ENGINE ยท 1GR-FE › CHARGING › GENERATOR

GENERATOR > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER


    A075593E01
  1. Remove the 2 nuts, then remove the V-bank cover.



2. REMOVE ENGINE NO. 1 UNDER COVER SUB-ASSEMBLY
  1. Remove the 4 bolts and engine under cover sub-assembly No. 1.



3. REMOVE FAN AND GENERATOR V BELT


    A076441E01
  1. While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.



4. REMOVE BATTERY


5. REMOVE GENERATOR ASSEMBLY


    A076407
  1. Disconnect the wire harness.

    1. Remove the bolt and wire harness stay.

    2. Disconnect the connector from the generator assembly.

    3. Remove the terminal cap and nut.

    4. Disconnect the wire harness from the terminal B.



    A076408
  1. Remove the 2 bolts and wire harness clamp bracket from the generator assembly.



    A076409
  1. Remove the 2 bolts and generator assembly.