Home › BODY › WINDSHIELD / WINDOWGLASS › POWER WINDOW CONTROL SYSTEM

POWER WINDOW CONTROL SYSTEM > Manual Up / Down Function Via Back Door Lock Key Cylinder does not Operate

for Preparation Click here


DESCRIPTION

If the manual UP/DOWN function via the back door lock key cylinder does not operate, the back door lock key cylinder or the wire harness may be abnormal.

WIRING DIAGRAM


B062910E01


INSPECTION PROCEDURE

1.CHECK BACK DOOR WINDOW OPERATION
  1. Check that the back door power window operates via the back door power window switch.



NG
OTHER PROBLEM
OK


2.INSPECT TAIL GATE CONTROL SWITCH ASSEMBLY (BACK DOOR LOCK KEY CYLINDER)


    B062911E01
  1. Disconnect the switch connector.

  1. Insert the key into the key cylinder.

  1. Check the continuity between the terminals of the switch connector when turning the key.

    Standard:
    Terminal No.
    Operation
    Specified Condition
    1 - 3
    Turn key to right
    Continuity
    1 - 2
    No operation
    No continuity
    2 - 3
    Turn key to left
    Continuity



NG
REPLACE TAIL GATE CONTROL SWITCH ASSEMBLY
OK

REPAIR OR REPLACE HARNESS AND CONNECTOR (BACK DOOR ECU - SWITCH)