Home › BODY ELECTRICAL › AUDIO / VISUAL › FRONT SIDE SPEAKER

FRONT SIDE SPEAKER > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH LH


    B062415E01
  1. Using a screwdriver, remove the lower frame bracket garnish.

    HINT:
    Tape the screwdriver tip before use.



2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL LH


    B062416E02
  1. Using a screwdriver, disengage the 3 claws, and remove the inside handle bezel.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE FRONT ARMREST ASSEMBLY LH


    B062417E01
  1. Disengage the claws, and remove the armrest from the trim board.

    HINT:
    Tape the screwdriver tip before use.



4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    B062418E01
  1. Remove the 2 cushion rubbers.

  1. Remove the 2 screws and clips.

  1. Using a clip remover, remove the 11 clips.

  1. Remove the trim board upward.

    HINT:
    In order to prevent the door from being damaged, cover the parts indicated by arrow marks in the illustration with tape.



    H006127E01
  1. Disconnect the 2 cables from the inside handle as shown in the illustration.

  1. Remove the inner weatherstrip.

  1. Remove the 3 screws and power window master switch.



    B064057E01
  1. Using a screwdriver, disengage the 4 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the power mirror switch, as shown in the illustration.



5. REMOVE FRONT NO. 1 SPEAKER


    I031482
  1. Disconnect the connector.

  1. Remove the 4 screws and front No. 1 speaker.



6. REMOVE FRONT NO. 2 SPEAKER


    I033307
  1. Disconnect the connector and remove the 2 bolts.

  1. Remove the front No. 2 speaker from speaker mounting bracket No. 1.