Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR SPEAKER

REAR SPEAKER > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR INSIDE HANDLE BEZEL LH


    B062416E03
  1. Using a screwdriver, disengage the 3 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Remove the inside handle bezel.



2. REMOVE REAR ARMREST ASSEMBLY LH


    B062417E01
  1. Disengage the 4 claws, remove the armrest assembly.

    HINT:
    Tape the screwdriver tip before use.



3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    B062434E01
  1. Remove the cushion rubbers.

  1. Remove the 2 screws.

  1. Using a clip remover, disengage the 12 clips, remove the 12 clips.

  1. Remove the trim board upward.

    HINT:
    In order to prevent the door from being damaged, cover the parts indicated by arrow marks in the illustration with tape.



    H006127E03
  1. Disconnect the 2 cables from the inside handle.

  1. Remove the trim board.

  1. Remove the inner weatherstrip.



4. REMOVE REAR SPEAKER


    I033309
  1. Disconnect the connector.

  1. Remove the 3 screws and rear speaker.