Home › BODY ELECTRICAL › AUDIO / VISUAL › WINDOW GLASS ANTENNA WIRE

WINDOW GLASS ANTENNA WIRE > REPAIR

for Preparation Click here



1. REPAIR WINDOW GLASS ANTENNA WIRE


    BE00150E08
  1. Clean the broken wire tips with a grease, wax and silicone remover.

  1. Place the masking tape along both sides of the wire to be repaired.

  1. Thoroughly mix the repair agent (Dupont+. paste No. 4817).



    BE00151E06
  1. Using a fine tip brush, apply a small amount to the wire.

  1. After a few minutes, remove the masking tape.

  1. Do not repair the defogger were for at least 24 hours.