Home › BODY ELECTRICAL › AUDIO / VISUAL › MICROPHONE AMPLIFIER

MICROPHONE AMPLIFIER > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY


    B063602E02
  1. Using a moulding remover, disengage the 3 claws and 2 clips.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the map light switch connector and sliding roof switch connector, and remove the console box.



2. REMOVE MICROPHONE AMPLIFIER


    E116109
  1. Remove the 4 screws.



    E116240
  1. Disconnect the connector.

  1. Disengage the 2 claws remove the amplifier microphone assembly.