Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER (w/o REAS)

REAR SHOCK ABSORBER (w/o REAS) > INSTALLATION

for Preparation Click here



1. INSTALL SHOCK ABSORBER ASSEMBLY REAR LH


    D028133
  1. Install the 3 cushion retainers, cushion No. 1, cushion No. 2 and shock absorber assembly rear LH with the nut.



    D028132
  1. Install the shock absorber assembly rear LH with the bolt.



    D028133
  1. Fully tighten the nut.

    Torque:
    25 N*m{ 255 kgf*cm , 18 ft.*lbf }



2. INSTALL REAR WHEEL

Torque:
112 N*m{ 1,137 kgf*cm , 83 ft.*lbf }



3. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



4. FULLY TIGHTEN SHOCK ABSORBER ASSEMBLY REAR LH


    D028132
  1. Fully tighten the bolt.

    Torque:
    98 N*m{ 1,000 kgf*cm , 72 ft.*lbf }