Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER (w/o REAS)

REAR SHOCK ABSORBER (w/o REAS) > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. REMOVE SHOCK ABSORBER ASSEMBLY REAR LH


    D028132
  1. Support the rear axle housing.

  1. Remove the bolt and separate the shock absorber assembly rear LH from the rear axle housing.



    D028133
  1. Remove the nut, 3 cushion retainers, cushion No. 1, cushion No. 2 and shock absorber assembly rear LH.