Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER (w/o REAS)

REAR SHOCK ABSORBER (w/o REAS) > DISPOSAL

for Preparation Click here



1. DISPOSE OF SHOCK ABSORBER ASSEMBLY REAR LH


    D028629E03
  1. Fully extend the shock absorber rod.

  1. Using a drill, make a hole in the cylinder as shown in the illustration to discharge the gas inside.

    CAUTION:
    1. When drilling, chips may fly out, and so work carefully.
    2. The gas is colorless, odorless and non-poisonous.