Home › SUSPENSION & AXLE › SUSPENSION › REAR COIL SPRING

REAR COIL SPRING > INSTALLATION

for Preparation Click here



1. INSTALL COIL SPRING REAR LH


    D028471
  1. Install the coil spring rear LH to the rear axle housing.

    HINT:
    Fit the lower end of the coil spring into the gap of the spring lower seat



2. CONNECT SHOCK ABSORBER ASSEMBLY REAR LH


    D028132
  1. Install the shock absorber, temporarily tighten the bolt.



3. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



4. FULLY TIGHTEN SHOCK ABSORBER ASSEMBLY REAR LH


    D028132
  1. Fully tighten the bolt.

    Torque:
    98 N*m{ 1,000 kgf*cm , 72 ft.*lbf }



5. CONNECT REAR BRAKE TUBE FLEXIBLE HOSE


    D028273E03
  1. Install the 2 clips with the 2 flexible hoses.

  1. Using SST, connect the break tubes to the flexible hose.

    Torque:
    15 N*m{ 155 kgf*cm , 11 ft.*lbf }

    SST
    09023-00101  



6. FILL RESERVOIR WITH BRAKE FLUID


7. BLEED BRAKE LINE


8. CHECK FLUID LEVEL IN RESERVOIR


9. CHECK BRAKE FLUID LEAKAGE


10. INSTALL REAR WHEEL

Torque:
112 N*m{ 1,137 kgf*cm , 83 ft.*lbf }