Home › SUSPENSION & AXLE › SUSPENSION › REAR COIL SPRING

REAR COIL SPRING > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. SEPARATE SHOCK ABSORBER ASSEMBLY REAR LH


    D028132
  1. Support the rear axle housing.

  1. Remove the bolt, separate the shock absorber assembly rear LH from the rear axle.



3. DISCONNECT REAR BRAKE TUBE FLEXIBLE HOSE


    D028273E02
  1. Using SST, disconnect the 2 rear brake tubes from each of the flexible hoses. Use a container to catch brake fluid as it drains out.

    SST
    09023-00101  

  1. Remove the 2 clips and disconnect the 2 flexible hoses.



4. REMOVE COIL SPRING REAR LH
  1. Start to lower the rear axle housing.

    NOTICE:
    Be careful not to snap the brake line and parking brake cable.

  1. While lowering the rear axle housing, remove the coil spring rear LH.