Home › SUSPENSION & AXLE › SUSPENSION › REAR UPPER CONTROL ARM

REAR UPPER CONTROL ARM > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. DISCONNECT HEIGHT CONTROL SENSOR LINK SUB-ASSEMBLY REAR (w/ Air Suspension)

HINT:
(Click here)



3. REMOVE UPPER CONTROL ARM ASSEMBLY


    D028137
  1. Remove the nut, washer and bolt from rear axle housing.

    HINT:
    While fixing the bolt, turn and remove the nut.



    D028138
  1. Remove the nut, washer and bolt with the upper control arm assembly.

    HINT:
    While fixing the bolt, turn and remove the nut.