Home › ENGINE ยท 1GR-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY


    B062162
  1. Install the ignition switch with the 2 screws.

  1. Install the clamp.

  1. Connect the un-lock warning switch connector and ignition switch connector.



2. INSTALL STEERING COLUMN UPPER COVER
  1. Install the steering column upper cover.



3. INSTALL STEERING COLUMN LOWER COVER
  1. Install the steering column cover lower to the steering column assembly.

  1. Install the 3 screws to the steering column cover upper and lower.