Home › ENGINE ยท 2UZ-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY


    B052423E09
  1. Inspect the switch continuity.

    Standard:
    Terminal No.
    Switch Position
    Specified Condition
    Between all terminals
    LOCK
    No continuity
    2 - 3
    ACC
    Continuity
    2 - 3 - 4
    6 - 7
    ON
    Continuity
    1 - 2 - 4
    6 - 7 - 8
    START
    Continuity

    If the result is not as specified, replace the switch assembly.