Home › ENGINE ยท 2UZ-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN LOWER COVER


    F043298
  1. Remove the 3 screws and steering column cover lower.



2. REMOVE STEERING COLUMN UPPER COVER
  1. Remove the steering column upper cover.



3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY


    B062162
  1. Disconnect the ignition switch connector and un-lock warning switch connector.

  1. Remove the clamp.

  1. Remove the 2 screws and ignition switch.