FEATURES > PERFORMANCE



OUTLINE


  1. 1GR-FE Engine



    1. The 1GR-FE engine is a 4-liter, 24-valve DOHC V6 engine. This engine uses a Dual Variable Valve Timing intelligent (Dual VVT-i) system, Direct Ignition System (DIS), Electronic Throttle Control System intelligent (ETCS-i), and air injection system. These control functions achieve improved engine performance, fuel economy, and clean emissions.


      W102075


      Item
      Specification
      No. of Cyls. & Arrangement
      6-cylinder, V-Type
      Valve Mechanism
      24-Valve DOHC, Chain Drive (with Dual VVT-i)
      Fuel System
      SFI
      Displacement
      3956 cm3 (241.4 cu. in.)
      Max. Output*
      270 HP@5600 rpm (201 kW@5600 rpm)
      Max. Torque*
      278 ft.*lbf@4400 rpm (377 N*m@4400 rpm)
      *: Maximum output and torque ratings are determined using the revised SAE J1349 procedure.



  2. A750E and A750F Automatic Transmission



    1. A750E and A750F 5-speed multi-mode automatic transmission are used.


      V100443E01


      Transmission Type
      A750E (2WD)
      A750F (4WD)
      Combination with Engine
      1GR-FE
      1GR-FE
      Combination with Transfer
      -
      VF2A*1
      VF2BM*1
      VF4BM*2
      Gear Ratio
      1st
      3.520
      3.520
      2nd
      2.042
      2.042
      3rd
      1.400
      1.400
      4th
      1.000
      1.000
      5th
      0.716
      0.716
      Reverse
      3.224
      3.224
      Differential Gear Ratio
      3.727
      3.727
      *1: Models with the part-time 4WD system
      *2: Models with the full-time 4WD system



  3. 4WD System

    1. The part-time 4WD system and full-time 4WD system are used.

    2. The part-time 4WD system has the transfer shift lever to select H2, H4 or L4 mode. (VF2A)

    3. The part-time 4WD system has the transfer position switch to select H2, H4 or L4 mode. (VF2BM)



    4. The full-time 4WD system has the transfer position switch to select H4F, H4L or L4L mode.


      V103893E01


      Text in Illustration 
      1
      Transfer Position
      H: High
      L: Low
      2
      Drive Type
      2: 2WD
      4: 4WD
      3
      Center Differential Condition
      F: Free
      L: Lock



  4. Suspension

    1. A Kinetic Dynamic Suspension System (KDSS) is used.

    2. A double-wishbone independent suspension is used for the front.



    3. A 4-link coil spring with lateral rod type suspension is used for the rear.


      V105177E01


      Text in Illustration 
      *A
      Models with KDSS
      *B
      Models without KDSS



    4. A Relative Absorber System (X-REAS) is used.


      X102402



  5. Steering

    1. A rack and pinion type steering gear with a hydraulic power steering assist is used.



    2. A Variable Flow Control (VFC) power steering is used.


      V105179E01


      Text in Illustration 
      *1
      Steering Gear Assembly
      *2
      Steering Column Assembly
      *3
      Vane Pump Assembly
      - VFC Solenoid Valve
      -
      -

  6. Brake

    Item
    Specification
    Front Brake
    Type
    Ventilated Disc
    Rotor Size (D X T)*
    338 x 32mm (13.3 x 1.26 in.)
    Rear Brake
    Type
    Ventilated Disc
    Rotor Size (D X T)*
    312 x 18 mm (12.28 x 0.71 in.)
    Brake Control System
    Anti-lock Brake System (ABS), Multi-terrain Anti-lock Brake System (Multi-terrain ABS), Electronic Brake force Distribution (EBD), brake assist, Traction Control (TRAC), Active Traction Control (A-TRAC), Limited Slip Differential (Auto LSD), Vehicle Stability Control (VSC), Hill-start Assist Control, Downhill Assist Control, CRAWL and Trailer Sway Control
    *: Diameter X Thickness