FUEL SYSTEM > DETAILS



CONSTRUCTION


  1. Fuel Delivery Pipe Sub-assembly

    1. Fuel delivery pipe sub-assemblies made of plastic are used to realize weight reduction.

    2. The right and left fuel delivery pipe sub-assemblies are connected by a nylon tube.

    3. The fuel pressure pulsation damper assembly is sealed with an O-ring and secured with a clip.



    4. A nickel-phosphorus alloy coating is used on the fuel pressure regulator and the fuel pressure pulsation damper to prevent the E20 fuel from corroding them.


      W102166E05


      Text in Illustration 
      *1
      Fuel Pressure Pulsation Damper Assembly
      *2
      O-ring
      *3
      Clip
      *4
      Fuel Delivery Pipe Sub-assembly
      *5
      Fuel Pressure Regulator Assembly
      *6
      Nylon Tube



  2. Fuel Tank Assembly



    1. The multi-layer plastic fuel tank consists of six layers of four types of materials, and one of those is a recyclable material to address environmental concerns.


      W102167E01


      Text in Illustration 
      *1
      Fuel Tank Assembly
      *2
      High Density Polyethylene (HDPE)
      *3
      Regrind Material
      *4
      Adhesive
      *5
      Ethylene Vinyl Alcohol Copolymer (EVOH)
      -
      -
      V100135
      Fuel Tank Outside
      V100136
      Fuel Tank Inside



  3. Fuel Injector Assembly

    1. The fuel injector assembly is shaped to form a long nozzle. This shortens the distance from the fuel injector assembly to the intake valve, which prevents the fuel from adhering to the intake port walls and reduces HC exhaust emissions. Depending on the type of fuel that is used, a 12-hole type fuel injector assembly is provided.



    2. The magnetic circuit, jet orifice and load spring inside the fuel injector are optimized for E20 fuel.


      W102172E01


      Text in Illustration 
      *a
      View A
      -
      -



  4. Fuel Suction with Pump and Gauge Tube Assembly



    1. A compact fuel suction with pump and gauge tube assembly is used. Its basic components are a fuel pump, a fuel filter, and a fuel sender gauge assembly.


      W102178E02


      Text in Illustration 
      *1
      Suction with Pump and Gauge Tube Assembly
      *2
      Fuel Sender Gauge Assembly
      *3
      Fuel Filter
      *4
      Fuel Pump