FOUR WHEEL DRIVE CONTROL SYSTEM > GENERAL |
| OUTLINE |
The part-time 4WD system optimally controls torque distribution to the front and rear wheels to realize superior traction performance in various road conditions.
| SPECIFICATION |
| Transfer Type | VF2BM | |
| Drive Type | Part-time | |
| Gear Type | Single Pinion Planetary | |
| Gear Ratio | H2 | 1.000 |
| H4 | 1.000 | |
| L4 | 2.566 | |
| Oil Viscosity | SAE 75W | |
| Oil Type | Toyota Genuine Transfer Gear Oil LF or Equivalent | |
| Oil Capacity | Liters (US qts, Imp. qts) | 1.0 (1.1, 0.9) |
| Weight (Reference)* | kg (lb) | 34.0 (75.0) |
| MAIN FEATURES |
The optimum mode to suit the road conditions is selected from the 3 type (H2, H4, L4) transfer modes by operating the transfer position switch.
| Transfer Mode | Transfer Position | Drive Type | Outline |
| H2 | High | 2WD | Conserves energy and reduces vibration and noise for normal driving on dry, hard-surfaced roads. |
| H4 | High | 4WD | Ensures excellent traction performance to suit various road conditions and vehicle speeds. |
| L4 | Low | 4WD | Ensures large driving force and suppresses engine torque. |