FOUR WHEEL DRIVE CONTROL SYSTEM > GENERAL



OUTLINE
  1. The part-time 4WD system optimally controls torque distribution to the front and rear wheels to realize superior traction performance in various road conditions.


SPECIFICATION

Transfer Type
VF2A
Drive Type
Part-time
Gear Type
Single Pinion Planetary
Gear Ratio
H2
1.000
H4
1.000
L4
2.566
Oil Viscosity
SAE 75W
Oil Type
Toyota Genuine Transfer Gear Oil LF or equivalent
Oil Capacity
Liters (US qts, Imp. qts)
1.0 (1.1, 0.9)
Weight (Reference)*
kg (lb)
33.4 (73.5)

HINT:
*: Weight shows the figure with the oil fully filled.


MAIN FEATURES
  1. The optimum mode to suit the road conditions is selected from the 3 type (H2, H4, L4) transfer modes by operating the transfer shift lever.

    Transfer Mode
    Transfer Position
    Drive Type
    Outline
    H2
    High
    2WD
    It conserves energy and reduces vibration and noise for normal driving on dry, hard-surfaced roads.
    H4
    High
    4WD
    It ensures excellent traction performance to suit the various road conditions and vehicle speeds
    L4
    Low
    4WD
    It ensures large driving force and suppresses engine torque.