DIFFERENTIAL SYSTEM > GENERAL



OUTLINE
  1. The SD20B or SD20BD front differential is used.



  2. The SD20BD front differential uses Automatic Disconnection Differential (A.D.D.).


    V100390E02


    Text in Illustration 
    *A
    SD20B Type
    *B
    SD20BD Type
    *1
    A.D.D. Shift Actuator
    -
    -

  3. The BD21B or BD21BN rear differential is used.



  4. The BD21BN rear differential is equipped with a differential lock.


    X103204E02


    Text in Illustration 
    *A
    BD21B Type
    *B
    BD21BN Type
    *1
    Rear Differential Lock Actuator
    -
    -


SPECIFICATION

Front Differential 
Front Differential Type
SD20B
SD20BD
Gear Type
Hypoid Gear
Hypoid Gear
Differential Gear Ratio
3.727
3.727
Ring Gear Size
mm (in.)
205 (8.1)
205 (8.1)
Oil Viscosity
SAE 75W-85
SAE 75W-85
Oil Grade
API GL-5
API GL-5
Oil Type
Hypoid Gear Oil
Hypoid Gear Oil
Oil Capacity
Liters (US qts, Imp. qts)
1.4 (1.5, 1.2)
1.55 (1.6, 1.3)
Weight (Reference)*
kg (lb)
34.5 (75.9)
36.5 (80.3)

HINT:
*: The figure shown is the weight of the part with fluid.


Rear Differential 
Rear Differential Type
BD21B
BD21BN
Gear Type
Hypoid Gear
Hypoid Gear
Differential Gear Ratio
3.727
3.727
Ring Gear Size
mm (in.)
208 (8.2)
208 (8.2)
Oil Viscosity
SAE 75W-85
SAE 75W-85
Oil Grade
API GL-5
API GL-5
Oil Type
Hypoid Gear Oil
Hypoid Gear Oil
Oil Capacity
Liters (US qts, Imp. qts)
2.7 (2.9, 2.4)
2.65 (2.8, 2.3)
Weight (Reference)
kg (lb)
28.8 (63.4)
31.2 (68.6)

MAIN FEATURES
  1. Rear Differential Lock System

    1. The sliding of the differential lock sleeve is accomplished by a rear differential lock actuator, which is controlled by the four wheel drive control ECU in based on the rear differential lock switch signal and other signals.

    2. Conditions required to operate the rear differential lock are different between the 2WD and 4WD models.