WIRELESS DOOR LOCK CONTROL SYSTEM > DETAILS



FUNCTION
  1. The wireless door lock control system has the following customizable functions:

    Function
    Outline
    Customizable*
    All Doors Lock
    Pressing the lock button of the door control transmitter locks the doors.
    Standard
    (Not Customizable)
    All Doors Unlock (2-step Unlock)
    Pressing the unlock button of the door control transmitter twice within 3 seconds unlocks all doors after it first unlocks the driver door.
    Standard
    (Not Customizable)
    Answer Back
    When the doors are being locked or unlocked through the operation of the door control transmitter, the wireless door lock buzzer sounds and the hazard lights blink. The lights blink and the buzzer sounds once during locking and twice during unlocking. Also, the answer back function operates when the doors are locked by the auto relock function.
    Default setting is on
    Panic Alarm
    Keeping the panic button of the door control transmitter pressed longer than about 0.8 seconds causes the following to activate as an alarm.
    1. Sounds the horn and security horn.
    2. Flashes the hazard lights, headlights, and taillights.
    3. Illuminates the interior light (If the switch is in the DOOR position).
    Default setting is on
    Automatic Relock
    If none of the doors are opened within 60 seconds after they are unlocked using the wireless door lock remote control, all the doors will be locked again automatically.
    Default setting is on
    Repeat
    If a door is not locked in response to the locking operation of the door control transmitter, the main body ECU will output a lock signal again after 1 second passes.
    Standard
    (Not Customizable)
    Security
    The transmitter sends door lock/unlock operation request signals as a rolling code.
    Standard
    (Not Customizable)
    Door Ajar Warning
    If any door is open or ajar, pressing the lock button of the door control transmitter will cause the wireless door lock buzzer to sound for about 5 seconds as a warning.
    Default setting is on

    1. *: The customizable settings can be turned on or off using the customized body electronics system. For details, refer to the Repair Manual for this model.


CONSTRUCTION


  1. Transmitter



    1. The transmitter for the wireless door lock control has a lock button, unlock button, and panic button.


      Y104012E01


      Text in Illustration 
      *1
      Unlock Button
      *2
      Lock Button
      *3
      Panic Button
      -
      -


DIAGNOSIS
  1. If there is a malfunction in the system, the main body ECU (multiplex network body ECU) stores Diagnostic Trouble Codes (DTCs) in its memory. For details, refer to the Repair Manual for this model.