LIGHTING SYSTEM > DETAILS



FUNCTION
  1. The illuminated entry system controls the following functions:

    Function
    Outline
    Lights that Operate
    Actuation Area-linked*1
    When the key enters any actuation area around the doors, the lights that operate turn on.
    1. Engine Switch Illumination
    2. Front Interior Light
    3. Rear Interior Light
    Door Control Transmitter-linked
    When any door is unlocked using the door control transmitter, the lights that operate turn on.
    1. Engine Switch Illumination*1
    2. Key Illumination*2
    3. Front Interior Light
    4. Rear Interior Light
    5. Footwell Light
    6. Inside Door Handle Illumination
    Door Open-linked
    When any door is opened, the lights that operate turn on.
    1. Engine Switch Illumination*1
    2. Key Illumination*2
    3. Front Interior Light
    4. Rear Interior Light
    5. Footwell Light
    6. Inside Door Handle Illumination
    7. Door Courtesy Light
    Door Close-linked
    When all doors are closed, the lights that operate turn off*3.
    Back Door Open-linked
    When the back door is opened, the lights that operate turn on.
    Back Door Light
    Back Door Close-linked
    When the back door is closed, the lights that operate turn off.
    Door Lock-linked
    When all doors are locked, the lights that operate turn off*4.
    1. Engine Switch Illumination*1
    2. Key Illumination*2
    3. Front Interior Light
    4. Rear Interior Light
    5. Footwell Light
    6. Inside Door Handle Illumination
    Shift Position-linked
    When the shift lever in P, the lights that operate turn on.
    1. Footwell Light
    2. Inside Door Handle Illuminationt
    When the shift lever in other than P, the lights that operate dim*5.
    Ignition Switch-linked
    When the ignition switch is changed from off to on (ACC) or on (IG), the lights that operate turn off*4.
    1. Engine Switch Illumination*1
    2. Key Illumination*2
    3. Front Interior Light
    4. Rear Interior Light
    5. Footwell Light
    When the ignition switch is changed from on (IG) to off, the lights that operate turn on.
    When the ignition switch is changed from off to on (ACC) or on (IG), the lights that operate turn on.
    When the ignition switch is changed from on (IG) to off, the lights that operate turn off*4.
    Shift Lever Light
    Battery Saving
    When no changes occur in the condition of the doors for 20 minutes, these lights turn off.
    1. Engine Switch Illumination*1
    2. Key Illumination*2
    3. Front Interior Light
    4. Rear Interior Light
    5. Footwell Light
    6. Inside Door Handle Illumination
    Interior Light Auto Cut
    When no changes occur in the condition of the lights on for 20 minutes, these lights turn off.
    1. Front Interior Light
    2. Rear Interior Light
    3. Vanity Light
    4. Door Courtesy Light
    5. Back Door Light

    1. *1: Models with smart key system
    2. *2: Models without smart key system
    3. *3: Illuminates for approximately 15 seconds, fades out over approximately 0.9 seconds and goes off. Illumination time can be selected from 15, 30 and 7.5 seconds using the customize function.
    4. *4: Stops the illumination, starts to fade out immediately (fades out over approximately 0.9 seconds) and goes off.
    5. *5: Approximately 9.5 percent brightness of light on state. Illumination can be adjust brightness from 0 to 100 percent of light on state using the customize function.