SEAT ASSEMBLY > DETAILS



CONSTRUCTION


  1. Front Seat



    1. Active Headrest

      1. Active headrests are provided, which move up and forward almost instantly in the event of a rear-end collision when the force of the occupant body is applied to the seat back and reduce the distance between the occupant's head and the headrest.
      2. The active headrest consists of the lower unit, cable and upper unit.
      3. When the lower unit built into the seat back is pressed by the occupant's lumbar as the occupant's body slides down during a rear-end collision, the cable is pulled and the headrest is moved up and forward by the upper unit, reducing the distance between the occupant's head and the headrest.

      Y104119E02


      Text in Illustration 
      *1
      Headrest
      *2
      Upper Unit
      *3
      Cable
      *4
      Lower Unit
      *a
      Normal Position
      *b
      Operating Position



    2. Power Lumbar Support

      1. The driver seat uses a 2-way adjustable lumbar support. This support includes a plastic basket that is to be placed in the lumbar area of the occupant, and which pushes the seatback forward, thus providing uniform support from the upper back down to the pelvis for a better fit.

      Y104120E01


      Text in Illustration 
      *1
      Seatback Frame
      *2
      Plastic Basket
      *3
      Front-back Adjustment
      -
      -



    3. Manual Lifter

      1. The driver seat uses a manual lifter. The entire seat can be vertically moved by operating the pump type lifter knob on the outer surface of the driver seat cushion.
      2. The manual lifter consists of the pump type lifter knob, lifter gear and lifter rod, thus accommodating various body types.

      Y104121E01


      Text in Illustration 
      *1
      Lifter Rod
      *2
      Lifter Gear
      *3
      Lifter Knob
      -
      -



  2. Rear No. 1 Seat



    1. Child Restraint System

      1. Child Restraint System (CRS) lower anchorages for securing child seats has been provided between the seat cushion and seat back.
      2. CRS anchor brackets for securing a child seats are provided behind the seat back.

      Y108201E01


      Text in Illustration 
      *A
      Two-row Seat Model
      *B
      T-row Seat Model
      *1
      CRS Lower Anchorage
      *2
      CRS Anchor Bracket



    2. Double-fold Mechanism (Two-row seat model)

      1. Seatback reclining mechanism is adopted and enables four-step (16°) reclining.
      1. Sliding striker enables the seat to be reclined.
      1. The double-fold operation is as follows.
        1. By pulling the lever, the headrest rotates forward. (1)
        2. By pulling the strap, the seat cushion folds forward. (2)
        3. By pushing the button, the seatback folds forward. (3)

      Y108202E01


      Text in Illustration 
      *1
      Lever
      *2
      Strap
      *3
      Button
      -
      -
      1. The reclining operation is as follows.
        1. Pull the lever. (Unlock) (1)
        2. Fold or recline the seatback. (2)
        3. Release the lever. (Lock) (3)

      Y108203E01


      Text in Illustration 
      *1
      Reclining Lever
      *2
      Striker



    3. Walk-in Mechanism (Three-row seat model)

      1. For models with three rows of seats, a walk-in mechanism is adopted for the back of the rear No.1 seat (passenger side).

      Y104125E01


      Text in Illustration 
      *1
      Reclining and Walk-in Lever
      *2
      Walk-in Lever



  3. Rear No. 2 Seat



    1. Double-flat Mechanism

      1. For models with three rows of seats, a double-flat mechanism is adopted.
      2. A double-flat seat capable of being operated and used for storage on the seating side and luggage compartment side is adopted.
      3. For operation from the luggage compartment side, a one-touch mechanism is adopted, enabling seat cushion and seatback storage using a single lever.
      4. A rotating headrest is adopted.
      5. For the seat cushion, a storage mechanism that slides backward is adopted.
      1. Operation from the front side of the rear No.2 seat is as follows.
        1. By pulling the strap, the headrest folds forward. (1)
        2. By pulling the lever near the floor, the cushion is automatically stored. (2)
        3. By pulling the lever on the shoulder part of the seatback, the seatback folds forward. (3)

      Y104126E01

      1. Operation from the back side of the Rear No.2 seat (from luggage compartment) is as follows.
        1. By pulling the strap, the headrest folds forward. (1)
        2. By pulling the one-touch lever at the back of the seatback, the cushion is automatically stored. At the same time, the lock on the seatback is released. (2)

        3. The seatback folds forward. (3)


          Y104127E01