BODY STRUCTURE > GENERAL



OUTLINE
  1. Lightweight and Highly Rigid Body

    1. High-strength steel sheet is used to secure safety and achieve a lightweight body.

  2. Safety Features

    1. In order to distribute impact force to the cabin and reduce floor displacement, reinforced panels and the placement of the structure are optimized.

    2. Optimizing the placement of the reinforced panels and the strength of the cross sections increases the rigidity of the coupling body structure, which increases safety.

  3. Rust-resistant Body

    1. Rust-resistance performance is enhanced by extensive use of anti-corrosion steel sheet, as well as by an anti-corrosion treatment which includes the application of anti-rust wax, sealer and anti-chipping paint to easily corroded parts such as the hood and doors.

  4. Low Vibration and Low Noise Body

    1. Effective application of vibration damping and noise suppressant materials reduces engine, wind and road noise.

  5. Aerodynamics

    1. Optimization of the shape of the body and underfloor ensures excellent aerodynamic performance.


MAIN FEATURES


  1. Exterior Design



    1. Front View

      1. The front bumper, the front radiator grille, the headlights and the fog light surrounds have been change to expresses the ruggedness of an off-road SUV.

      Y139053E01


      Text in Illustration 
      *A
      SR5
      *B
      TRAIL
      *C
      LIMITED
      -
      -



    2. Rear View

      1. The three-dimensional impression given by the widened bumper and license plate periphery combines with an under guard-shaped rear bumper that swoops upward from below to express the appearance of a dynamic off-road SUV.

      Y139054E01


      Text in Illustration 
      *A
      SR5
      *B
      TRAIL
      *C
      LIMITED
      -
      -

    3. Side View


      1. For the body silhouette, the front and rear overhangs have been raised, the front pillar has been curved vertically and the rear pillar has been slanted forward, creating an overall body structure that expresses a sense of motion.


        Y139055


      2. In addition to connecting the side shoulder surface and rear flare form, the square-shaped flares in the front and rear create a powerful solid structure.


        Y139057


      3. The side shoulder surface has been connected to the back door, emphasizing the feeling of width.


        Y139056


      4. To reduce the amount of mud and snow thrown up around the tires adhering to the upper surfaces of the power lift step assembly, the shape of the front fender mudguards and the shape of the rear quarter panel mudguards have been changed.


        Y138918E01


      Text in Illustration 
      *A
      LIMITED
      *B
      Except LIMITED
      *1
      Front Fender Mudguard
      *2
      Rear Quarter Panel Mudguard