BODY STRUCTURE > DETAILS



FUNCTION


  1. Impact Absorbing Structure for Side Collision



    1. Using double-piled reinforcements and brackets reinforces the sun roof housing assembly, which increases safety.


      Y103999E01


      Text in Illustration 
      *1
      Sun Roof Housing Assembly
      *2
      Reinforcement
      *3
      Bracket
      -
      -
      *a
      A-A Cross Section
      -
      -



    2. A head impact protection structure is used. With this type of construction, if the occupant's head hits against the roof side rail or pillar due to a collision, the inner panels of the roof side rail and pillar collapse to help reduce the impact.


      Y104000


      Text in Illustration 
      V100145
      Head Impact Protection Structure
      -
      -

    3. Energy absorbing pads are used for the front and rear door trims and front door to help protect passengers from side collisions.



    4. Crushable structures are used for the front and rear door trim arm rests, on the areas where passengers may come into contact in the case of an accident, reducing the impact on the passengers.


      Y104001E01


      Text in Illustration 
      *1
      Front Door
      *2
      Front Door Trim
      *3
      Rear Door Trim
      -
      -
      V100145
      Energy Absorbing Pad
      V100144
      Crushable Structure



  2. Lessening Pedestrian Injury

    1. A longitudinal ribbed structure is adopted for the inner hood to cushion impact.



    2. The shock absorbing material is used at the hood bulge of this car and the energy absorbing structure is used at the hood inner panel reinforcement.


      Y104002E01


      Text in Illustration 
      *A
      Models with Hood Bulge
      -
      -
      *1
      Hood Bulge
      *2
      Hood Inner Panel Reinforcement
      *a
      Longitudinal Ribbed Structure
      -
      -



    3. An impact absorbing bracket is used for the mounting portion of the front fender panel to absorb impact energy to the head of the pedestrian in a collision, thus dampening the impact to the head.


      Y104003E01


      Text in Illustration 
      *1
      Impact Absorbing Bracket
      -
      -



    4. The cowl area has an open structure. In the event of a collision with a pedestrian, this structure helps lessen the impact inflicted by the cowl to the head of the pedestrian.


      Y104004E01


      Text in Illustration 
      *1
      Hood Panel
      *2
      Windshield Glass
      *3
      Cowl Top Ventilator Louver
      *4
      Cowl Top Panel
      *a
      A-A Cross Section
      *b
      Open Section Structure



  3. Aerodynamics



    1. The Front Spoiler, Rear Spats, Under Cover and Rear Spoiler are adopted to achieve the excellent aerodynamic performance.


      Y104005E01


      Text in Illustration 
      *1
      Front Spoiler
      *2
      Rear Spats
      *3
      Under Cover
      *4
      Rear Spoiler


CONSTRUCTION


  1. High-strength Steel Sheet



    1. High-strength steel sheet is used in order to achieve excellent body rigidity and a lightweight body.


      Y104008


      Text in Illustration 
      V100145
      High-Strength Steel Sheet
      -
      -



  2. Anti-corrosion Steel Sheet



    1. Anti-corrosion steel sheet is used as in the following illustration:


      Y104009E02


      Text in Illustration 
      *A
      Models with Sliding Roof
      -
      -
      V100145
      Anti-corrosion Steel Sheet
      -
      -



  3. Under Coat



    1. Acrylic acid resin is applied to the under side of the body, inside the wheel housing and other parts that are susceptible to stone chipping damage, thus improving the rust-resistant performance of these areas.


      Y104010E01


      Text in Illustration 
      *a
      Under Floor
      *b
      Rear Wheel House
      Y102599
      Edge Seal
      V100145
      Acrylic Acid Resin Coating Area
      V100144
      Acrylic Acid Resin Coating Area (Thick Coating)
      -
      -



  4. Anti-chipping Application



    1. To protect the paint from chipping, anti-chipping paint is applied to the door panels and the hood panel.


      Y104011


      Text in Illustration 
      V100145
      Soft-chip Primer Area
      V100144
      PVC-chip Primer Area



  5. Low Vibration and Low Noise Body



    1. The layout of the sound-absorbing material is optimized to reduce noise and vibration.


      Y104013


      Text in Illustration 
      V100145
      Sound-absorbing Material
      -
      -



    2. To reduce the amount of road noise, engine noise, and droning sound that enters the cabin, the floor panel is coated with a floor silencer.


      Y104014E01


      Text in Illustration 
      *A
      Two-row Seat Models
      *B
      Three-row Seat Models
      V100145
      Floor Silencer
      -
      -



    3. To achieve a quiet cabin, sound-absorbing material is optimally allocated across a wide area including the floor carpet, ceiling, inner dash silencer and door trim.


      Y104015


      Text in Illustration 
      V100145
      Sound-absorbing Material
      -
      -