POWER STEERING SYSTEM > GENERAL



OUTLINE
  1. A rack and pinion type steering gear with a hydraulic power steering assist is used.

  2. A Variable Flow Control (VFC) power steering is used.


SPECIFICATION

Power Steering System 
Steering Gear Type
Rack and Pinion
Power Steering Type
Hydraulic
Gear Ratio (Overall)
16.0
Fluid Type
ATF Type DEXRON II or III

Steering Gear Assembly 
No. of Turns Lock to Lock
3.00
Rack Stroke
158.0 mm (6.2 in.)

Vane Pump Assembly 
Engine Type
1GR-FE
Theoretical Discharge Rate (@ 1000 r/min)
11.0 l/min
Relief Pressure
←
Drive Type
←

MAIN FEATURES
  1. Variable Flow Control (VFC) Power Steering

    1. The VFC power steering is provided with a solenoid valve, which is controlled by the power steering ECU, in the vane pump.

    2. The solenoid valve controls the discharge flow rate of the power steering fluid in accordance with the operating conditions of the steering wheel, vehicle speed, engine speed and transfer drive mode. Thus, it reduces the load on the engine applied by the actuation of the vane pump, and improves fuel economy.