STEERING LOCK SYSTEM > DETAILS



FUNCTION
  1. Steering Lock Assembly

    1. The steering lock ECU, lock/unlock detection switch, lock/unlock motor and steering lock bar are integrated into the steering lock actuator assembly. The operation of the lock bar is controlled by the steering lock ECU using the lock/unlock motor.

    2. The steering lock ECU detects the position (lock/unlock) of the lock bar and transmits this information to the power management ECU and certification ECU (smart key ECU assembly). This information is used for the smart key system.

    3. In this system, the certification ECU (smart key ECU assembly) determines whether to lock/unlock the steering based on communication with the power management ECU. Then, the certification ECU (smart key ECU assembly) sends lock/unlock command signals to the steering lock ECU. Upon receiving the signals, the steering lock ECU operates the lock/unlock motor to lock/unlock the steering.

      HINT:
      It is not possible to replace only the steering lock ECU in the steering lock assembly. Therefore, if the ECU malfunctions, the entire steering lock assembly must be replaced.