POWER DOOR LOCK CONTROL SYSTEM > DETAILS



FUNCTION
  1. The power door lock control system has the following customizable functions:

    Function
    Outline
    Customizable*1
    One-motion Open (Driver and Front Passenger)
    When the door is locked, this function enables the door to be unlocked by merely pulling the inside handle lever of the door.
    Standard
    (Not Customizable)
    Manual Lock and Unlock
    This function can lock or unlock all the doors by the door lock switch LH or RH operation.
    Standard
    (Not Customizable)
    Key-linked Lock and Unlock
    This function which is linked with the door key cylinder can lock or unlock all the doors when a lock or unlock operation is effected.
    Standard
    (Not Customizable)
    2-step Unlock
    This function is provided to unlock the driver door when the key is turned in the key cylinder the first time, and to unlock the remaining doors when it is turned the second time.
    Standard
    (Not Customizable)
    Manual Unlock Prohibition Function
    Performing the door lock operation with a transmitter (wireless remote) or a key will prohibit the unlock operation by the door lock control switch.
    Default setting is on
    Key Confinement Prevention
    When the key is in the interior detection area*2 or the key is inserted into the ignition key cylinder*3, if the door lock operation is performed with the driver door open, all the doors will be unlocked.
    Standard
    (Not Customizable)
    Shift-linked Automatic Door Lock
    When the conditions listed below are met, this function causes all the doors to be automatically locked.
    1. The engine is running.
    2. All doors are closed.
    3. The shift lever is moved out of P.
    Default setting is on
    Speed-sensitive Automatic Door Lock
    When the conditions listed below are met, this function causes all the doors to be automatically locked.
    1. Vehicle speed is higher than approximately 20 km/h (12 mph).
    2. All doors are closed.
    3. Any one of the doors is in an unlocked state.
    Default setting is off
    Shift-linked Automatic Door Unlock
    When the ignition switch is on (IG), and the shift lever is moved to P, all the doors will be automatically unlocked.
    Default setting is on
    Driver Door Opening-linked Automatic Door Unlock
    All doors are automatically unlocked when the driver door is opened within 10 seconds after the engine switch is changed from on (IG) to on (ACC) or off.
    Default setting is off
    Back door Open
    Pressing the back door opener switch when the back door is unlocked will open the back door.
    Standard
    (Not Customizable)

    1. *1: The customizable functions can be turned on or off using the customized body electronics system. For details, refer to the Repair Manual for this model.
    2. *2: Models with smart key system
    3. *3: Models without smart key system