Condition
| Item
|
(1)
| - There is no ignition key in the ignition key cylinder*1 or key is not in the detection area*2.
- All doors, engine hood and back door are closed.
- All doors are locked using the door control transmitter lock button, the smart key system, or mechanical key.
|
(2)
| The system switches to the armed state when the doors, engine hood and back door are closed and locked, and 30 seconds have elapsed.
|
(3)
| The system switches to the disarmed state when one of the following conditions is met.
- The engine hood, back door or any door is opened.
- The engine hood, back door or any door is unlocked.
- The ignition key is inserted in the ignition key cylinder*1.
- The engine switch is pushed*2.
- A terminal is disconnected from the battery and reconnected.
|
(4)
| The system switches to the alarm state when one of the following conditions is met.
- With all doors closed, the engine hood, or back door is opened.
- With all doors locked, any door is unlocked by a method other than the mechanical key, door control transmitter, or key.
- A terminal is disconnected from the battery and reconnected.
|
(5)
| The system switches to the disarmed state when one of the following conditions is met.
- Any door is unlocked with the mechanical key or transmitter.
- The back door is opened with the mechanical key or transmitter.
- The ignition switch is changed to ON or ACC*1.
- The engine switch is changed to on (IG)*2.
|
(6)
| The system reverts to the armed state after the alarm time (60 seconds) elapses.
|