INTUITIVE PARKING ASSIST SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. The components have the following functions:

    Component
    Function
    No. 1 Ultrasonic Sensor
    Detects the distance between the vehicle and the obstacle.
    Clearance Warning ECU assembly
    Judges the approximate distance between the vehicle and obstacle based on the signals from the ultrasonic sensors and sends the buzzer signal to the clearance warning buzzer.
    No.1 Clearance Warning Buzzer
    Emits an intermittent sound to inform the driver that the clearance warning ECU assembly has detected an obstacle within the prescribed range.
    Combination Meter Assembly
    Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.
    Clearance Sonar Main Switch
    Turns the power of the intuitive parking assist system on/off.
    Park/Neutral Position Switch Assembly
    Transmits the R position signal to the clearance warning ECU assembly.


OPERATING CONDITION
  1. The intuitive parking assist system operates when all the following conditions have been met:

    1. Ignition switch is ON.

    2. Back sonar switch is on.

    3. Shift lever is anything expect P.


CONSTRUCTION


  1. Ultrasonic Sensor



    1. This system uses 6 ultrasonic sensors: 2center ultrasonic sensors and 4 corner ultrasonic sensors. Each ultrasonic sensor consists of a sensor portion that transmits and receives ultrasonic waves and a pre-amplifier that amplifies them. Each ultrasonic sensor transmits ultrasonic waves, receives the reflected waves from an obstacle behind the vehicle, and transmits a signal to the clearance warning ECU assembly regarding the distance to the obstacle (approximately 1.5 m or less).


      Y104045



  2. Clearance Warning Buzzer



    1. When the No. 1 ultrasonic sensor transmits ultrasonic waves and receives the reflected waves from an obstacle, the buzzer sounds in stages according to the distance to the obstacle.


      Y100456



  3. Combination Meter Assembly



    1. When the No. 1 ultrasonic sensor transmits ultrasonic waves and receives the reflected waves from an obstacle, the indicator flashes in stages according to the distance to the obstacle.


      Y138968E01


      Text in illustration 
      *a
      Although all areas with the sensors are marked in the illustrations, only the area with a malfunctioning sensor will be indicated by in an actuation vehicle..
      -
      -

  4. Clearance Warning ECU Assembly

    1. The clearance warning ECU assembly effects overall control of the system, including switching between transmission and reception of the ultrasonic sensor signals, processing the received wave signals, determining the presence of obstacles, actuating the clearance warning buzzer, and determining the presence of an open circuit in the sensors.


OPERATION
  1. After the intuitive parking assist system has started its activation, it sounds the clearance warning buzzer for about 1 second, while checking for any malfunction in the ultrasonic sensors.



  2. The on/off times of the clearance warning buzzer and combination meter assembly vary as shown in the table below, depending on the distance to the obstacle and the No. 1 ultrasonic sensor that is detecting the obstacle.


    Obstacle Distance [mm (in.)]
    Off Time (ms)
    On Time (ms)
    Detection Area
    A
    B
    No. 1 Ultrasonic Sensor
    Center
    Corner
    Detection Lever
    1st
    Approx. 350 +/-50 (13.8 +/-1.97) or less
    Approx. 300 (11.8) or less
    0
    Continuous
    2nd
    Approx. 350 +/-50 to 450 +/-50 (13.8 +/-1.97 to 17.7 +/-1.97)
    Approx. 300 (11.8) to 450 (17.7)
    75
    75
    3rd
    Approx. 450 +/-50 to 600 +/-60 (17.7 +/-1.97 to 23.6 +/-2.36)
    Approx. 450 (17.7) to 600 (23.6)
    150
    150
    4th
    Approx. 600 +/-60 to 1500 +/-150 (23.6 +/-2.36 to 59.1+/-5.91)
    -
    650
    150


    Y138967E01


DIAGNOSIS
  1. If the system cannot activate its detection function due to a malfunction in an ultrasonic sensor, it alerts the driver of the malfunction by the sounding the clearance warning buzzer. For details, refer to the Repair Manual.