FOUR WHEEL DRIVE CONTROL SYSTEM > GENERAL



OUTLINE
  1. The full-time 4WD system optimally controls torque distribution to the front and rear wheels to realize superior traction performance in various road conditions.


SPECIFICATION

Transfer Type
VF4BM
Drive Type
Full-time
Gear Type
Single Pinion Planetary
Gear Ratio
H4F/H4L
1.000
L4L
2.566
Center Differential Type
TORSEN*1 Limited Slip Differential (LSD)
Oil Viscosity
SAE 75W
Oil Type
Toyota Genuine Transfer Gear Oil LF or equivalent
Oil Capacity
L (US qts, Imp. qts)
1.4 (1.5, 1.3)
Weight (Reference)*2
kg (lb)
41.2 (90.8)

HINT:
*1: TORSEN is JTEKT CORPORATION's registered trademark.
*2: Weight shows the figure with the oil fully filled.


MAIN FEATURES
  1. The optimum mode to suit the road conditions is selected from the 3 type (H4F, H4L and L4L) transfer modes by operating the transfer position switch.

    Transfer Mode
    Transfer Position
    Center Differential Condition
    Outline
    H4F
    High
    Free
    1. It ensures excellent traction performance to suit the various road conditions and vehicle speeds.
    2. The center differential controls torque distribution to the front and rear wheels.
    H4L
    High
    Lock
    1. It ensures impressive ability to negotiate in sand, mud, snow, etc.
    2. The center differential is locked to exert grip to the wheels.
    L4L
    Low
    Lock
    1. It is selected to use large driving force such as when driving on extremely bumpy surfaces of off-road terrain that is very slippery and uphill terrain with steep inclines.
    2. The center differential is locked to exert grip to the wheels.