AUTOMATIC RUNNING BOARD SYSTEM > GENERAL



OUTLINE
  1. Automatic running board system has been used to automatically deploy and stow the steps when the door is opened or closed*1.

  2. System control is regulated by the side auto step controller ECU assembly.

  3. A jam protection function has been used to reverse the motor and stow (or deploy) the step when a foreign object is detected during deployment (or stowing).

  4. If for any reason, the step does not deploy to the correct position*1 and the fail-safe function is triggered, the indicators in the combination meter assembly light or blink*2.

    HINT:
    1. *1: Door open: step deployed, Door closed: step stowed.
    2. *2: The indicator turns off when the step returns to its normal position, or if the indicator has been lit or blinking for more than 20 minutes.


Y112290E01


Text in Illustration 
*1
Step
-
-
*a
Stow
*b
Deploy