POWER SEAT CONTROL SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. Front Power Seat

    Component
    Function
    Front Power Seat Switch
    Operates the front power seat.
    Lumbar Support Switch*1
    Operates the lumbar support.
    Seat Memory Switch*2
    Operate the driving position memory function.
    Position Control ECU*2
    1. Operates the motors in accordance with the signals from the front power seat switch.
    2. Registers and recalls seat positions in accordance with the operation of the seat memory switch.
    Main Body ECU*2
    Various signals are transmitted and received via the Controller Area Network (CAN) by way of the main body ECU.

    1. *1: For driver side
    2. *2: Models with memory function


OPERATING CONDITION
  1. Memory Function

    1. The operating conditions of the memory function are as follows:

      Function
      Condition
      Operation
      Memory
      Either of the following conditions is met while the engine switch is on (IG):
      1. Button 1 or 2 is pushed while the "SET" button is pushed.
      2. Button 1 or 2 is pushed within 3 seconds after the "SET" button is pushed.
      1. Stores the seat position.
      2. When the memory setting is completed, the buzzer will sound for 0.5 seconds.
      Recall
      1. Engine switch is on (IG).
      2. Shift lever is in P.
      3. Button 1 or 2 is pushed.
      Recalls the seat position that was memorized in the position control ECU.
      Button 1 or 2 is pushed within 180 seconds after:
      1. Engine switch is off.
      2. Driver door is opened.
      Button 1 or 2 is pushed within 60 seconds after:
      1. Engine switch is off.
      2. Driver door is closed.
      Memory Call
      1. A key ID is registered to button 1 or 2.
      2. Engine switch is off.
      3. Driver seat belt is not in use.
      4. The inside of the outside door handle is touched or the key unlock button is pushed to unlock, and the driver door is then opened.
      The seat automatically returns to the memorized seat position.


FUNCTION
  1. Front Power Seat

    1. The front power seat system controls the driver seat using by the front power seat switch.

    2. The lumbar support function, which offers extra support over a substantial area of the lower back, is used.*1

    3. The memory function controls the driver seat.*2

    4. Each function of the front power seat operates as follows:

      Function
      Outline
      Manual Control
      The user can perform slide, reclining, front vertical*1, seat lifter*1 and lumbar support*1 adjustments by operating the front power seat switch and lumbar support switch.
      Memory*1, 2
      Memory
      The memory function can memorize 2 different seat positions.
      Recall
      The recall function can recall 2 different memorized seat positions.
      Memory Call
      The memory call function, which utilizes the key IDs, is used to memorize and retrieve the optimal driving positions for a person possessing the key.

      1. *1: For driver side
      2. *2: Models with memory function