Home › Vehicle Exterior › MIRROR (EXT) › OUTER MIRROR SWITCH

OUTER MIRROR SWITCH > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 SWITCH HOLE BASE


    B239275
  1. Detach the 6 clips and 2 guides.

  1. Disconnect each connector and remove the No. 2 switch hole base.



2. REMOVE OUTER MIRROR SWITCH ASSEMBLY


B241761
  1. Using a screwdriver, detach the 4 claws and remove the switch.

    HINT:
    Tape the screwdriver tip before use.