POWER DOOR LOCK CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Customize.
Select the setting by referring to the table below.
| Display | Default | Content | Setting |
| Auto Lock | OFF | Function that locks all doors when the vehicle speed reaches a certain level. | ON or OFF |
| Auto Lock/Shift | ON | Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. | ON or OFF |
| Auto Unlock/Shift | ON | Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON. | ON or OFF |
| All Unlock/Open-Close | OFF | Function that unlocks the other doors when the driver door is opened within 10 seconds after the ignition switch is turned off. | ON or OFF |