Home › Vehicle Exterior › DOOR / HATCH › HOOD SUPPORT

HOOD SUPPORT > DISPOSAL

for Preparation Click here



1. DISPOSE OF HOOD SUPPORT ASSEMBLY
  1. Horizontally hold the hood support in a vise with the piston rod pulled out.



    B238472E01
  1. Wear safety glasses. Gradually cut any area between A and B shown in the illustration using a metal saw to release the gas.

    Standard:
    Area
    Measurement
    A - B
    50 mm (1.97 in.)

    CAUTION:
    Although the gas inside the hood support is colorless, odorless and harmless, there is a possibility that metal debris could scatter. Therefore, cover it with a piece of cloth or other material.