METER / GAUGE SYSTEM > INITIALIZATION |
| OIL MAINTENANCE INFORMATION MODE RESET OPERATION |
Turn the ignition switch to ON, and use the ODO/TRIP switch to change the screen display to TRIP A.
Turn the ignition switch off.
While holding in the ODO/TRIP switch, turn the ignition switch to ON.
After a 5 second count, reset will end.

| METHOD TO DISABLE ECO DRIVING INDICATOR LIGHT |
With the vehicle stationary or at a vehicle speed of less than 8 km/h (4.9 mph), press and hold the DISP switch on the steering pad switch to display the meter customize mode screen.
Press the DISP switch on the steering pad switch to display the "ECO LAMP" screen, and then press the DISP switch.
Press the DISP switch on the steering pad switch to select "OFF", and then press the DISP switch.
Press the DISP switch on the steering pad switch to end meter customize mode.