STEERING LOCK SYSTEM > PRECAUTION |
| 1.PRECAUTIONS WHEN WORKING ON ELECTRIC STEERING LOCK |
After replacing the steering lock actuator assembly (steering lock ECU), perform key ID code registration.
After replacing the steering lock actuator assembly (steering lock ECU), confirm the lock/unlock operation of the steering lock.
| Steering Lock Condition | Procedure |
| Lock | With the engine switch off, open and close any door. |
| Unlock | Turn the engine switch from off to on (ACC) or on (IG). |
If checking for DTCs of the smart key system or if checking the Data List with the engine switch off, make sure that the driver door is open.
When a steering lock system DTC is output, confirm and record the DTCs before turning the engine switch off or clearing the DTCs, as past DTCs are not stored in the certification ECU.