Home › Engine / Hybrid System › 1GR-FE STARTING › IGNITION SWITCH

IGNITION SWITCH > REMOVAL

for Preparation Click here



1. REMOVE LOWER STEERING COLUMN COVER


    A225246
  1. Remove the 2 screws.

    HINT:
    Turn the steering wheel to the right and left as necessary to remove the 2 screws.

  1. Detach the 2 claws to remove the lower steering column cover.



2. REMOVE IGNITION SWITCH ASSEMBLY


    A222874
  1. Disconnect the ignition switch connector and key interlock solenoid connector and detach wire harness clamp.

  1. Remove the 2 screws and ignition switch.

  1. Detach the claw and disconnect the key interlock solenoid wire harness from the ignition switch.