Home › Drivetrain ยท A750E AUTOMATIC TRANSMISSION / TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > ADJUSTMENT

for Preparation Click here



1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    D025795E19
  1. Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.

  1. Align the neutral basic line with the switch groove.

  1. Hold the switch in position and tighten the bolt.

    Torque:
    13 N*m{ 130 kgf*cm , 9 ft.*lbf }

    Text in Illustration 
    *1
    Neutral Basic Line
    *2
    Groove

  1. After the adjustment, perform the on-vehicle inspection (Click here).