Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
a9-1 (+B) - a9-3 (GND)
| W - W-B
| Battery power supply
| Always
| 11 to 14 V
|
a9-2 (DIA) - a9-3 (GND)
| GR - W-B
| Diagnosis (DLC3)
| Ignition switch ON
| Pulse generation
|
a9-3 (GND) - Body ground
| W-B - Body ground
| Ground
| Always
| Below 1 V
|
a9-4 (FSR-) - a9-3 (GND)
| LG - W-B
| Center airbag sensor assembly communication line
| Always
| Below 1 V
|
a9-5 (BGND) - a9-3 (GND)
| P - W-B
| Front passenger side buckle switch ground line
| Always
| Below 1 V
|
a9-7 (IG2) - a9-3 (GND)
| B - W-B
| Ignition switch power supply
| Ignition switch ON
| 11 to 14 V
|
a9-8 (FSR+) - a9-4 (FSR- )
| L - LG
| Center airbag sensor assembly communication line
| Ignition switch ON
| Pulse generation
|
a9-9 (BSW) - a9-5 (BGND)
| G - P
| Front passenger side buckle switch line
| Always
| Pulse generation
|
a10-1 (SGD1) - a9-3 (GND)
| G - W-B
| Front occupant classification sensor LH ground line
| Always
| Below 1 V
|
a10-2 (SGD2) - a9-3 (GND)
| LG - W-B
| Front occupant classification sensor RH ground line
| Always
| Below 1 V
|
a10-3 (SGD3) - a9-3 (GND)
| W - W-B
| Rear occupant classification sensor LH ground line
| Always
| Below 1 V
|
a10-4 (SGD4) - a9-3 (GND)
| BR - W-B
| Rear occupant classification sensor RH ground line
| Always
| Below 1 V
|
a10-11 (SVC1) - a10-1 (SGD1)
| R - G
| Front occupant classification sensor LH power supply line
| Ignition switch ON, load applied to front occupant classification sensor LH
| 4.9 to 5.1 V
|
a10-12 (SVC2) - a10-2 (SGD2)
| W - LG
| Front occupant classification sensor RH power supply line
| Ignition switch ON, load applied to front occupant classification sensor RH
| 4.9 to 5.1 V
|
a10-5 (SVC3) - a10-3 (SGD3)
| GR - W
| Rear occupant classification sensor LH signal line
| Ignition switch ON, load applied to rear occupant classification sensor LH
| 4.9 to 5.1 V
|
a10-6 (SVC4) - a10-4 (SGD4)
| V - BR
| Rear occupant classification sensor RH signal line
| Ignition switch ON, load applied to rear occupant classification sensor RH
| 4.9 to 5.1 V
|
a10-7 (SIG1) - a10-1 (SGD1)
| P - G
| Front occupant classification sensor LH signal line
| Ignition switch ON, load applied to front occupant classification sensor LH
| 0 to 5.1 V
|
a10-8 (SIG2) - a10-2 (SGD2)
| L - LG
| Front occupant classification sensor RH signal line
| Ignition switch ON, load applied to front occupant classification sensor RH
| 0 to 5.1 V
|
a10-9 (SIG3) - a10-3 (SGD3)
| SB - W
| Rear occupant classification sensor LH power supply line
| Ignition switch ON, load applied to rear occupant classification sensor LH
| 0 to 5.1 V
|
a10-10 (SIG4) - a10-4 (SGD4)
| B - BR
| Rear occupant classification sensor RH power supply line
| Ignition switch ON, load applied to rear occupant classification sensor RH
| 0 to 5.1 V
|