OCCUPANT CLASSIFICATION SYSTEM > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Check the DTCs by following the prompts on the screen.
| CLEAR DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Clear the DTCs by following the prompts on the screen.