Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/o Smart Key System)

DOOR CONTROL TRANSMITTER (w/o Smart Key System) > INSTALLATION

for Preparation Click here


NOTICE:
Take extra care when handling these precision electronic components.



1. INSTALL TRANSMITTER BATTERY


    B102768
  1. Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.

  1. Install the cover.



2. INSTALL DOOR CONTROL TRANSMITTER PACKING


3. INSTALL DOOR CONTROL TRANSMITTER MODULE
  1. Install the door control transmitter module.



4. INSTALL TRANSMITTER HOUSING COVER
  1. Install the transmitter housing cover to the transmitter housing case.

  1. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.