Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL TRANSMITTER (w/o Smart Key System)

DOOR CONTROL TRANSMITTER (w/o Smart Key System) > REMOVAL

for Preparation Click here


NOTICE:
Take extra care when handling these precision electronic components.



1. REMOVE TRANSMITTER HOUSING COVER

NOTICE:
Take extra care when handling these precision electronic components.



    B225782E01
  1. Twist a screwdriver in the direction of the arrow in the illustration and open the transmitter housing cover.

    NOTICE:
    Do not forcibly pry open the cover.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



2. REMOVE DOOR CONTROL TRANSMITTER MODULE


    B137124E01
  1. Using a precision screwdriver, remove the door control transmitter module.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Protective Tape



3. REMOVE DOOR CONTROL TRANSMITTER PACKING


4. REMOVE TRANSMITTER BATTERY


    B102246
  1. Twist a coin in the direction of the arrow in the illustration and remove the transmitter battery cover.



    B102247
  1. Remove the battery (lithium battery: CR2016).

    NOTICE:
    1. Do not push the terminals with your finger.
    2. Do not forcibly pry up the battery. The terminals may become damaged.
    3. Do not touch the battery with wet hands. Water may cause rust.
    4. Do not touch or move any components inside the transmitter. The transmitter may cease to work.