Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE FRONT DOOR LOWER FRAME BRACKET GARNISH RH


    B240255
  1. Detach the 2 clips to remove the front door lower frame bracket garnish LH.



2. REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL RH


    B240256E01
  1. Using a moulding remover, detach the 3 claws to remove the No. 2 door inside handle bezel LH as shown in the illustration.
    Text in Illustration 
    *1
    Moulding Remover



3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    B353477
  1. Detach the 4 claws to remove the 2 door armrest caps.



    B353478
  1. Remove the 3 screws.

  1. Detach the 11 clips.



    B353479E01
  1. Pull out the front door trim board sub-assembly LH in the direction indicated by the arrow shown in the illustration.

  1. Raise the front door trim board sub-assembly LH and detach the 4 claws and reference boss to remove the front door trim board sub-assembly LH together with the front door inner glass weatherstrip LH.
    Text in Illustration 
    *1
    Reference Boss



    B240574
  1. Disconnect the connector.



    B238525
  1. Disconnect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH.



4. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP RH


    B238526
  1. Using a screwdriver, detach the 4 claws to remove the front door inner glass weatherstrip LH from the front door trim board sub-assembly LH as shown in the illustration.



5. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


  1. Detach the 10 claws from the backside and remove the power window regulator switch with base panel.


    B242795

  1. Disconnect the connectors.



    B241670
  1. Detach the 2 claws and remove the power window regulator switch.