Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
  1. Attach the 2 claws to install the power window regulator switch.

  1. Connect the connectors.

  1. Attach the 10 claws to install the power window regulator switch with base panel.



2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP RH


    B240611
  1. Attach the 4 claws to install the front door inner glass weatherstrip LH as shown in the illustration.



3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY RH


    B240612
  1. Connect the front door lock remote control cable assembly LH and front door inside locking cable assembly LH.



    B240574
  1. Connect the connector.



    B354466E01
  1. Attach the front door trim board sub-assembly LH to the 4 claws of the front door inner glass weatherstrip LH as shown in the illustration.

  1. Attach the reference boss.
    Text in Illustration 
    *1
    Reference Boss



    B353478
  1. Attach the 11 clips to install the front door trim board sub-assembly LH.

  1. Install the 3 screws.



    B353477
  1. Attach the 4 claws to install the 2 door armrest caps.



4. INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL RH


    B357473
  1. Attach the 3 claws to install the No. 2 door inside handle bezel LH.



5. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH RH


    B240255
  1. Attach the 2 clips to install the front door lower frame bracket garnish LH.