Home › Vehicle Interior › SEAT › CLIMATE CONTROL SEAT SYSTEM

CLIMATE CONTROL SEAT SYSTEM > TERMINALS OF ECU

for Preparation Click here



AIR CONDITIONING AMPLIFIER


  1. Measure the voltage and resistance according to the value(s) in the table below.


    E124486E90


    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    F87-9 (ROUT) - Body ground
    LG - Body ground
    Output climate control signal (Front passenger side)
    Engine switch on (IG)
    Refreshing seat switch RH blower side level 3
    Pulse generation
    (see waveform 1)
    F87-10 (LOUT) - Body ground
    L - Body ground
    Output climate control signal (Driver side)
    Engine switch on (IG)
    Refreshing seat switch LH blower side level 3
    Pulse generation
    (see waveform 1)
    F87-15 (SW 5) - Body ground
    W - Body ground
    Input climate control signal (Front passenger side)
    Engine switch on (IG)
    Refreshing seat switch RH level 0
    4.5 to 5.5 V
    Engine switch on (IG)
    Refreshing seat switch RH blower side level 3
    Below 1 V
    F87-16 (SW 4) - Body ground
    V - Body ground
    Input climate control signal (Driver side)
    Engine switch on (IG)
    Refreshing seat switch LH level 0
    4.5 to 5.5 V
    Engine switch on (IG)
    Refreshing seat switch LH blower side level 3
    Below 1 V
    F42-31 (S5-4) - Body ground
    V - Body ground
    Power supply
    Engine switch on (IG)
    4.5 to 5.5 V
    F42-35 (SG-4) - Body ground
    SB - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, the air conditioning amplifier may have a malfunction.



      B188622E01
    1. Using an oscilloscope, check waveform 1.
      Waveform 1 (Reference) 
      Item
      Content
      Terminal No. (Symbol)
      F87-9 (ROUT) - Body ground
      F87-10 (LOUT) - Body ground
      Tool Setting
      2 V/DIV., 500 μsec/DIV.
      Condition
      Engine switch on (IG)
      Refreshing seat switch blower side level 3